Destination 4x4 - Must Have

Quicker Swaybar Disconnect; Front; Quick-release swaybar end link; Variable length; Attaches to swaybar and axle housing; Bolt-on; Pair

Wrangler JK Quicker Swaybar Disconnect; Front; Quick-release swaybar end link; Variable length; Attaches to swaybar and axle housing; Bolt-on; Pair

Eliminating the factory spare tire carrier for any reason exposes the plastic/rubber factory cabin vent. Left exposed, there can be an increased amount of dirt/debris entering the inside of the tailgate. Covering it completely will affect cabin airflow when the top/doors are on and cause the HVAC system not to work properly.

Adding a stubby rear bumper, high-clearance fenders/flares or removing the rear spare tire. All things that can gain more clearance at the back of a JK for the best function on the trail. What's left? The plastic license plate holder that sticks off the back corner of the Jeep waiting to get bashed in by a tree, rock, etc. This leaves the mount and license plate tattered and in some cases ripped right off the Jeep. Adding a JKS License Plate Relocation Kit w/Light solves this problem.

Our heavy duty Bartact Paracord grab handles allow you to customize the look of your Jeep, UTV, or Buggy, while providing a comfortable grip. They work with both padded, and non-padded roll bars. You will NOT find better made handles anywhere...Guaranteed!

*Made with 100% U.S. Made 550 Paracord
*Hand woven in the U.S.A.
*Steel Hardware
*Rubber non-slip backing
*The strongest handles in the industry

JK, TJ, YJ Spare Tire License Plate Mount Kit. This is a great addition for those looking to move their license plate from the lower corner of the body where it can be damaged on the trail. Also, for JK owners that like the idea of our popular JKS8210 License Plate Mount Kit but still want to run a spare tire on the back of their rig. Relocates license plate to the center of the spare tire, mounted off of the existing spare tire mount studs.

• Works with stock and most aftermarket spare tire mounts with 5 on 4.5 or 5 on 5 lug patterns
• Eliminates the factory plastic license plate mount (or steel YJ flip down mount) that protrudes out the back driver's side of the vehicle. Works great with stubby rear bumpers, corner guards and/or replacement fenders for a clean, high clearance look and functions
• Laser cut and CNC formed using 10 gauge steel
• Durable gloss black powder coat
• Plate mount has adjustable depth from 4-1/4" to 6-1/4" off the spare mount surface to allow plate clearance for nearly any wheel
• Mount is easily disconnected for quick access to the spare tire when you need it. Mount is secured to the spare wheel studs via push nuts to keep in it when removing/installing the spare
• Includes high-quality waterproof polycarbonate license plate light with 2 high power SMD LEDs to maintain legal lighting on the license plate
• Includes JK specific instructions for using the 3rd brake light wiring to power the license plate light using supplied high-end electrical splice connectors. TJ and YJ models will require additional wiring and power sourced from the rear tail light harness
• For JK models, the kit includes a factory license plate location cover plate and tailgate plugs for 3rd brake light wiring and spare tire bumper holes

WORKS WITH FIRE EXTINGUISHERS WITH A HOLDING CAPACITY OF 2.5 LBS. IF YOU RUN A KIDDE FIRE EXTINGUISHER, YOU MUST USE THE TALLER, WHITE MARINE FIRE EXTINGUISHER WITH THE 2.5 LB HOLDER, EVEN THOUGH IT IS LISTED AT OVER 3 LBS. OUR HOLDER IS TALLER THAN THE RED AND/OR GREY KIDDE FIRE EXTINGUISHERS THAT THEY LIST AS 2.5 LBs. KIDDE ONLY LISTS 'GROSS' WEIGHT ON THEIR BOTTLES, WHICH IS DECEPTIVE, AND HAS MUCH LESS ABILITY TO EXTINGUISH A FIRE. WE RECOMMEND USING AMEREX, OR SIMILAR FIRE EXTINGUISHERS.

**COYOTE, OLIVE DRAB, ACU CAMO, AND MULTICAM ARE U.S. MADE CORDURA NYLON, AND THE SAME FABRIC WE USE FOR MILITARY PRODUCTS. HOWEVER, DUE TO THE FACT THAT THESE ARE NYLON, IT IS NOT POSSIBLE TO ADD UV INHIBITORS IN THE MILLING OF THE FABRIC, SO THERE IS NO 3 YEAR ANTI-FADE WARRANTY ON THOSE COLORS.

Introducing the highest quality, most thought out Multi-Cell Flashlight holder in existence. You could settle for a cheap Chinese holder that comes in black only with a tiny piece of 1" hook and loop that you pray is stitched on and won't fall off...or you could get our universal 2-cell, 3-cell, 4-cell holder, which is proudly Made in the U.S.A. - Did we mention, you have your choice of colors for no extra charge? That's right! Match your Flashlight Holder to the color of your vehicle, and/or any Bartact or Trek Armor seat covers and accessories. This fits both padded and non-padded roll bars, AND PALS webbing as a MOLLE accessory...so no matter how you roll, you're covered! Please scroll through all of the photos to see the capabilities.
Roll Bar Flashlight Holder
**COYOTE, OLIVE DRAB, ACU CAMO, AND MULTICAM ARE U.S. MADE CORDURA NYLON, AND THE SAME FABRIC WE USE FOR MILITARY PRODUCTS. HOWEVER, DUE TO THE FACT THAT THESE ARE NYLON, IT IS NOT POSSIBLE TO ADD UV INHIBITORS IN THE MILLING OF THE FABRIC, SO THERE IS NO 3 YEAR ANTI-FADE WARRANTY ON THOSE COLORS.

Slim and Strong

Allow 2-3 weeks for shipping, depending on demand.

The 1-piece design is great for crawling. It comes with a slim width and profile that allows for aggressive approach angles and maximum ground clearance. However, we haven't sacrificed strength. Like our Stubby Bumper, the Pro Series is made from industry-leading CNC laser-cut steel plate.

Grade 8 mounting hardware comes with the bumper, along with a fairlead mounting plate for your winch. Recovery tabs are built-in and it comes primed and black texture powder-coated. And of course, like all of our products, it comes with the ACE Lifetime Warranty. You break it while wheeling, we'll replace it. No questions asked.

A Double Row LED Light Bar integrated INTO the bumper

This bumper takes a bit more work to install than our Stubby, but it's not beyond the reach of your average handy Jeeper. The crash bar needs to be removed, and the frame horn requires trimming to accommodate for the slim design. If you're running a 12 or newer JK, the vacuum pump will need to be relocated as well. Vacuum pump relocation instructions can be viewed here. If that's a bit beyond your skill set, we can install at our shop, or point you in the direction of an installer in your area.